M18 mold repair machine (also known as imitation laser welding machine) is an intelligent welding machine independently developed and produced by our company, which combines mold repair, precision part welding and small part welding. The machine greatly reduces the technical requirements of workers for precision welding and repair, and greatly improves the service life of repair and welding products. It is a revolution in precision welding. The secondary inverter technology adopted by the machine can be compared with similar products in the market, and the ultimate hardness is 3 & deg higher; HRC, the welding of the thinnest plate can reach 0.06mm (equivalent to the thickness of a hair wire). This mold repair machine is suitable for injection mold, stamping mold, die-casting mold, rubber mold, tire mold, precision part welding, ultra precision part resistance spot welding, thin pipe welding, knife edge welding, etc.

1、 Function of jh-m18 mold repair machine

Precision spot welding continuous spot welding resistance welding

2、 Application scope of jh-m18 mold repair machine

3、 Product features of jh-m18 mold repair machine

1. Welded sheet

This welder can weld the thinnest 0.06mm and the thinnest hollow pipe 0.6mm, such as guide wire for heart surgery.

2. Low temperature

The welding temperature of this welder is 30% lower than that of the same type of welder on the market. For example, for many products with rubber or sealing ring under the plate, the surface plate can be welded without damaging the main body of rubber or plastic tissue.

3. High hardness

This welder uses CPU to control the current and voltage. For example, when the current parameter value is 10, the parameter value of its internal voltage will change accordingly, so that the welding temperature becomes the most appropriate temperature and just melts the welding wire, so that the welding wire & ldquo; Annealing & rdquo; The phenomenon is very low. The similar products in the market can not achieve the effect of current and voltage phase regulation, so the welding hardness and service life of this welder are increased by 15% compared with similar welders.

4. Operability

The CPU used in this welder controls the opening and closing of the welding cap screen and the arc starting and ending of the welding gun at the same time. However, the arc starting and ending time of this welder occurs in a few tenths of a second, but similar products in the market can not achieve the effect of synchronization, resulting in & ldquo; Flash eyes & rdquo; The operator's eyes will be injured when the phenomenon occurs. Therefore, when the operator operates, he will see the operated workpiece clearly. Generally, the initial operator (without any experience in operating the welding machine) can skillfully operate and actually weld the repair products within two hours

5. Stability

85% of the electronic components of this welder are imported electronic components. For example, the MOS tube used is an American on product. Our company is a direct customer of American on and has a customer number. We can purchase directly from on to ensure the authenticity of the components. Therefore, the stable performance of the product is guaranteed, and our company promises that the warranty period of this welder is one year longer than the time required by the state.

4、 Repair case of jh-m18 mold repair machine